US-Blow Cleaner

US-Blow Cleaner

US-Blow Cleaner

Ultrasonic dry cleaner

optic-bonding-optical-bonding-cleaning-us-cleaner

Us Cleaner

Features

  • This is a dry cleaner device that removes foreign matter efficiently by lifting up and removing the foreign matter with ultrasonic air
  • This equipment removes foreign matters on FPD, etc. byusing ultrasonic air without contact
  • 1.6 μm particle can be removed 100% by dry cleaner. Since the dry cleaning method is introduced, any water, chemicals, etc. are not required. Cleaning on one side or both sides is possible.

Mechanism of ultrasonic dry cleaner

optic-bonding-optical-bonding-mechanism-of-ultrasonic-dry-cleaner

Removal capability of ultrasonic dry cleaner

Example of removing 3μm fine particles (100% removed after treatment)

optic-bonding-optical-bonding-before-after-treatment
  • Blow 20-30kHz ultrasonic air
  • Make foreign objects resonate and float from the workpiece
  • Suck the floating foreign objects in vacuum
  • Removal rate of fine particles of 10μm or less exceeds 99%

Strong point

Foreign matter can be removed without touching the workpiece

No worries about damage, scratches, damage, etc. on the workpiece surface

Foreign matter removal is possible without using chemicals or water

It is not necessary to treat chemicals and the environment can be considered

Foreign matter can be removed with one equipment

This enables to reduce installation space and running costs

Possible to remove foreign matter on both sides

Only the surface or both sides can be cleaned with the number of cleaner heads installed

No need for large utility facilities

No need for large utility facilities

Specifications

ItemSpecification
Stage sizeCorrespond to up to 10th generation
Stage materialCorrespond to various materials (ceramic)
Thrust up pin materialCorrespond to various materials
Thrust up pin drive methodPulse motor of cam mechanism
Thrust up strokeFrom 50 mm to 105 mm (fixed)
Vacuum padΦ 15 mm made by VITON
Stage driveBall screw + AC servo motor
Stage speedFrom 5 to 600 mm / sec
Setting methodDigital setting in operation panel
Cleaner headSelectable
Head widthEffective length + α
Substrate thickness measurementInstalled
VCROption
Alignment mechanismOption
Static electricity measureOption

Industry Application

Glass cleaning in the LCD manufacturing process

Pre-cleaning before wet cleaning

Cleaning glass and film before and after process in touch panel manufacturing process

Cleaning applications for photovoltaic panels

Removing foreign matter in general operations (for example, removal of foreign matter from roll-to-roll packaging film)

optic-bonding-covid

NOTIFICATION